Composite Doors: Steps to Successfully Installing a Composite Door for Your Home

The installation of composite doors in a house should be carried out by people with experience doing these kinds of installation. Since there are some components that are quite heavy, it is important to have two people involved in the installation process. Otherwise, the results may not be ideal.

The first step in installing composite doors is inspecting the existing door and, once removed, inspecting the space where the new door will go in. Your new door should be the proper size and should open and close correctly. Before you install it, inspect your door for possible defects or damage, and make sure to test the locks and all keys. Once you've ensured that your door is in good shape, remove all packaging and protective film that may be attached to it. The opening for the door should be in good condition. Since it will not be possible to do so once the door is installed, take this moment to repair any defective brickwork or mortar.

Once you've thoroughly inspected all components involved in the installation, you will need to cut the new sill to the correct size and use sill end caps at each end of the sill. Always check for level. Then lift your door and place it in the opening. One thing that is very important to remember is to not remove the door from the frame. When installing, these should remain attached and be installed together. Take extra care to ensure that everything is square and level. A door that is not level and square will not work properly. Leave a space of 150 millimetres from the top and the bottom. Masonry screws that are suitable for your opening and composite door should be used to security the frame to the opening Fischer fixings often work well for this. Each time you fit a new fixing and do not over tighten!

There many reasons why composite doors are better than traditional wooden doors. They can be made to match the weight, feel, and size of a wooden door, without any of the drawbacks. In fact, composite doors offer a high degree of customization, allowing you to specify designs and measurements that may not be possible or practical with wooden door. Most importantly, composite doors are more resistant to daily wear and tear. They can resist dents, unlike wood, and will not be affected by humidity and other factors that cause wooden doors to warp or twist.

Composite Doors Wakefield from Envy Windows Limited. The Premier Choice for all Windows, Doors, Conservatories and much more. Serving the whole of West Yorkshire. Peace of Mind Guaranteed

The Advantages of Composite Doors over Timber Doors

Are you looking into the option of replacing your doors? Composite doors should definitely be among your top choices, especially if you are just looking at timber door options.


Composite doors look just like timber, but have none of timber's disadvantages they last longer, are easier to fit, are much stronger, need no maintenance and you can pick from a wide variety of colours and styles.

Putting some thought into your front door is very important. It should be inviting, practical, and aesthetically pleasing, while at the same time being strong enough to withstand the test of time and keep intruders out.

Composite doors can be tailored to fit your specifications, unlike timber. While glass and timber doors can look good, they have many drawbacks that composite doors do not have. For example, glass doors do not provide a great deal of security and timber doors require constant upkeep and maintenance if you want them to last for years. To keep a timber door, you need to paint or varnish it regularly, or the wood can rot or warp due to the weather. In the long run, a poorly maintained timber door can be very expensive. Choosing a front door for your home can be a lot of work, but by choosing a Composite Door you will have less potential problems in the future.

Fortunately, composite doors are strong, safe, and can be made to look however you wish. By combining many materials, composite doors avoid many of the flaws that timber doors (or other doors made from a single material) have. By optimising building materials, composite doors can be sturdy, thanks to a solid composite sub-frame and an exterior hardwood layer.

To avoid warping and to make composite doors more secure, these can often include steel reinforcements that can give the door greater stability while not taking away any of its aesthetic appeal. By combining different materials, composite doors are very resistant to weather damage and, unlike timber doors, rarely (if ever) warp, twist, or crack.

Composite door manufacturers will often use GRP to even make composite doors dent-resistant! You can also manage your door's insulation and help the environment by saving energy timber doors are often big energy wasters.

If you want a window in your composite door, you can also rest easy knowing that the material can be replaced easily without having to remove the entire door, unlike timber doors. This gives builders greater freedom when designing these doors. You can easily acquire a composite door that will match your home's exterior and interior decor and even have them look exactly like timber, if that's what you want. 

Welcome to the New Envy Windows Blog

A warm welcome to the new Envy Windows Blog, which is part of the full recent re-build of our main website.

We we are always aiming to improve customer services and have decided have build our online presence to make our business more accessible to the ever growing online community.

Our new website showcases a far more extensive selection of windows, doors, conservatories, canopies, carports and roofline products.

Envy Windows was founded in 1988 by Nick Varley, Envy Windows has gone from strength to strength with a firm emphasis on quality - both in their products and in their customer service, before, after and during installation.

View the new Envy Windows website